HR - Helical Rotor Pumps
Helical Solar Submersible Pump, 10 GPM, 525 FT Head, 90-400 VDC or 90-265 VAC, Brushless Motor
Flow Range: 3-12 GPM (11-45 LPM), Depth Range: 50-525 Ft. (15-160 m), DC Voltage Range: 90-400, AC Voltage Range: 90-265, Minimum Well Diameter: 4" (100mm), Discharge Size: 1 1/4" NPT, Controller: HR Control Module (CM)
The positive displacement Helical Rotor (HR) AC-DC pumps can be powered by AC or DC power ranging from 90-400 VDC or 90-265 VAC.
Helical Solar Submersible Pump, 12 GPM, 200 FT Head, 70-190 VDC, Brushless Motor
Flow Range: 2-13 GPM (7-50 LPM), Depth Range: 50-200 ft (15-61 m), DC Voltage Range: 70-190, Minimum Well Diameter: 4" (100mm), Discharge Size: 1 1/4" NPT, Controller: HR Stop Module, Max Load Current: 10 amps
HR DC pumps (Helical Rotor) have been developed to meet the low cost pumping system needs without sacrificing quality, reliability or performance.
Helical Solar Submersible Pump, 12 GPM, 328 FT Head, 90-400 VDC or 90-265 VAC, Brushless Motor
Flow Range: 3-12 GPM (11-45 LPM), Depth Range: 50-525 Ft. (15-160 m), DC Voltage Range: 90-400, AC Voltage Range: 90-265, Minimum Well Diameter: 4" (100mm), Discharge Size: 1 1/4" NPT, Controller: HR Control Module (CM)
The positive displacement Helical Rotor (HR) AC-DC pumps can be powered by AC or DC power ranging from 90-400 VDC or 90-265 VAC.
Helical Solar Submersible Pump, 5 GPM, 400 FT Head, 70-190 VDC
Flow Range: 1-6 GPM (4-22 LPM), Depth Range: 100-400 ft (30-121 m), DC Voltage Range: 70-190, Minimum Well Diameter: 4" (100mm), Discharge Size: 1 1/4" NPT, Controller: HR Stop Module, Max Load Current: 10 amps
HR DC pumps (Helical Rotor) have been developed to meet the low cost pumping system needs without sacrificing quality, reliability or performance.
Helical Solar Submersible Pump, 5 GPM, 750 FT Head, 90-400 VDC or 90-265 VAC, Brushless Motor
Flow Range: 1-6 GPM (4-23 LPM), Depth Range: 200-750 Ft. (60-228 m), DC Voltage Range: 90-400, AC Voltage Range: 90-265, Minimum Well Diameter: 4" (100mm), Discharge Size: 1 1/4" NPT, Controller: HR Control Module (CM)
The positive displacement Helical Rotor (HR) AC-DC pumps can be powered by AC or DC power ranging from 90-400 VDC or 90-265 VAC.